DINO CRA/ET-3200 TRA

 

 

TECHNICAL FEATURES

  • Base made of ductile cast iron of 1.8m height and truncated-cone shape with four decorative vertical clefts disposed at 90º. Provided with register door and anchoring base plate for ground clamping. 
  • Shaft made of galvanised steel tube with curved cylindrical geometry, its clamping to base is done through a male-female junction, being the shaft the male part and the base the female part. Shaft clamping and alignment is done with lateral hidden screws on the base’s top end.
  • Register door made of grey cast iron, for connecting boxes and earth connecting bolt access. Locking by screws actionable with simple tooling.
  • Junction point between base and shaft.
  • Ductile cast iron of quality EN-GJS-500-7 according to standard UNE-EN-1563. Grey cast iron of quality EN-GJL-200 according to standard UNE-EN-1561. Steel of quality S-235-JR according to standard UNE-EN-10025.

 

FINISHING

Shaft:

  • Hot dip galvanization in liquid Zinc gives the shank a superficial coating of 600 gr/m2, both in the interior as well as the exterior sides of the shank.

Base and shaft:

  • Two-component Epoxi priming coat homogenously applied with a minimum thickness of 40µ.
  • Final colour  coating in two-component polyurethane paint. Applied with a minimum thickness 70µ in black forge colour. Other colours available on demand.
Historical places
Historical places
Centros históricos
Urban modern design
Urban modern design
Diseño urbano moderno
Pedestrian areas
Pedestrian areas
Zonas peatonales
Large avenues
Large avenues
Grandes avenidas
Residential
Residential
Zonas residenciales
Parks
Parks
Jardines

Related products

© 2015 COPYRIGHT ROS