BAFLE BLRA-75

DESCRIPTION

  • Anti-vandalism beaconing luminaire with main body made in grey cast iron.
  • Front grating made in ductile cast iron, mechanized to place and hold the rest of components.
  • Ductile cast iron’s quality is EN-GJS-500-7, made according to standard EN1563. Grey cast iron’s quality is EN-GJL-200, made according to standard EN1561.
  • Diffuser made of tempered glass sealed internally grating.
  • Earth connection deck.
  • Support tray for clamping the optical group and driver.
  • IP-66, optical group.
  • IK-10, optical group.
  • Working ambient temperature -30ºC to +50ºC.
  • IP-66, optical group.
  • IK-10, optical group.
  • Working ambient temperature -30ºC to +50ºC.

 

DIMENSIONS


 

ELECTRICAL FEATURES
 

  • From 10W to 100W by adjusting the output current through driver programming.
  • Class I.
  • Average life: L80 B10>100.000h
  • Constant current driver, programmable to fit the most suitable working parameters according to project requirements.
  • DALI / 1-10V / Time Dimmer / Mains reduction.
  • Up to 32 LED (programmable power from 10 to 100W) mounted on a PCB with an electronic circuit.
  • Electronic design for a short-circuiting condition between anode and cathode in case of LED failure, ensuring the performance of the remaining LEDs.
  • PCB board fixed internally on the bottom side of the aluminium module. The heat sinker, made of aluminium fins, is located on the upper side of this module for optimal heat dissipation.
  • Optical lenses with high transmittance, made of PMMA, giving the desired light distribution.
  • Lower diffuser made of flat transparent Methacrylate, sealing the optical group.
  • LED module temperature control, adjustable to desired limit values.
    Constant luminous flux along LED lifetime.
  • Adjustable start-up time.
  • Power reduction and programmed time dimmer up to 5 different levels.
  • Adjustable power by selection of output current.
  • Optionally, remote management system by incorporating an antenna or a power line control device.

 

PHOTOMETRIC FEATURES

  • 2.200ºK, 2.700ºK, 3.000ºK, 4.000ºK.
  • CRI 70. 80 on demand.
  • FHS <0,1%.
  • Up to 140lm/w according to selected optics and power.
  • One photometric distribution.

 

REGULATION

  • Lantern:
    EN 60598-1:2015+AC:2015+AC:2016
    EN 60598-2-3:2003+AC:2005+A1:2011
  • LED Module:
    EN 62031:2008+A1:2013+A2:2015
  • Optical safety:
    EN 62471:2008
  • EMC:
    EN 55015:2013
    EN 61000-3-2:2014
    EN 61000-3-3:2013
    EN 61547:2009
  • Driver:
    EN 61347-2-13:2014/A1:2017
    EN 62384:2006/A1:2009
  • Electromagnetic safety:
    EN62493:2010
Urban Modern Design
Urban Modern Design
Parks
Parks
Jardines
Pedestrian areas
Pedestrian areas
Zonas peatonales

Technological options

Download documents

© 2015 COPYRIGHT ROS