Base made of grey cast iron of 0.97m height and truncated-cone shape with longitudinal and transversal decorative designs. Provided with register door and anchoring base plate for ground clamping.
Shaft made of grey cast iron with truncated-cone geometry, its clamping to base is done through a male-female junction, being the shaft the male part and the base the female part. Shaft clamping and alignment is done with lateral hidden screws on the base’s top end. Optional top embellishment.
Register door made of grey cast iron, for connecting boxes and earth connecting bolt access. Locking by screws actionable with simple tooling.
Junction point between base and shaft.
Clamping at the top with thread 3/4‘’Gx50mm or Ø60x70mm.
Grey cast iron of quality EN-GJL-200 according to standard UNE-EN-1561.
Two-component Epoxi priming coat homogenously applied with a minimum thickness of 40µ.
Final colour coating in two-component polyurethane paint. Applied with a minimum thickness 70µ in black forge colour. Other colours available on demand.